Name: CO₂ Laser MONOR® 1490 – 130W
Brand: MONOR
SKU: CO21490
Price: 6765.00 EUR
Availability: InStock

Ideal Applications and Intended Use

The MONOR 1490 is an ideal laser system for craftsmen, sign makers, decoration manufacturers and small-scale production workshops. Its large 1400 × 900 mm working area allows processing of larger materials and oversized parts, while the powerful 130W CO₂ laser tube delivers high cutting speeds together with precise engraving, even on fine details. The machine is designed for reliable everyday operation while remaining easy to use, even for users without previous laser experience.

130W CO₂ Laser Tube with Real Output Power

At the core of the machine is a high-quality CO₂ laser tube with an initial peak output of approximately 148W, which naturally stabilizes to a true continuous 130W output throughout its service life.

For us, “130W” means real long-term working power — not just a short peak value measured on a brand-new tube.

It is important to note that some sellers label 100W tubes as “130W” because their temporary peak output may briefly reach around 129W. In practice, however, these are still 100W-class tubes.

The MONOR 1490 combines genuine 130W performance with a large 1400 × 900 mm working area, making it ideal for clean cutting and precise engraving, even on thicker materials.

130W CO₂ Laser Tube with Real Output Power

1400×900 mm

Working Area

130W

Laser Power

CW5200

Industrial Cooling System

Knife Blade and Honeycomb Working Table

The MONOR 1490 is equipped with two working tables for maximum flexibility:

Knife Blade Table

Designed for clean cutting of harder materials without burn marks on the underside of the cut.

Honeycomb Table

Ideal for cutting small parts that could otherwise fall through the working table during processing.

Both tables can be easily exchanged depending on the application and material type.

Dual Electronically Controlled Exhaust System

The machine is equipped with two exhaust fans for highly efficient removal of smoke and fumes from the working area. Both fans are electronically controlled — they automatically start when the job begins and continue running for several seconds after the job is completed thanks to an adjustable delay timer (1–60 seconds). This ensures effective extraction of remaining fumes while also helping protect the machine optics and internal components.

Autofocus and Height-Adjustable Z-Axis Table

The autofocus system automatically sets the correct lens height for each material, ensuring precise focusing and consistent cutting or engraving quality.

Combined with the height-adjustable Z-axis table, the machine can also process thicker materials and cylindrical objects when using a rotary attachment.

Ruida Digital Control System

The reliable and proven Ruida controller offers:

– intuitive operation,

– support for RDWorks and LightBurn software,

– USB and LAN connectivity,

– project storage and direct job restart from the control panel.

Geared Servo Motors and Enclosed Linear Guide System

The MONOR 1490 is equipped with geared servo motors that provide smoother motion and higher positioning accuracy, even during rapid direction changes.

Thanks to the geared drive system, motor load is reduced, service life is extended and vibrations that could affect cutting quality are minimized.

The motion axes are built with modular enclosed linear guides that protect the mechanical system from dust, fumes and debris.

This solution minimizes maintenance requirements, reduces friction and ensures long-term precision, smooth movement and quiet operation even during intensive daily use.

Compact Design and Removable Legs

The MONOR 1490 is designed with practical dimensions and easy handling in mind. If needed, the machine legs can be removed, reducing the overall machine height to approximately 72 cm. This allows the machine to be carefully tilted and transported through narrow doorways or confined spaces without difficulty — an ideal solution for smaller workshops, studios or office environments.

Electronically Controlled Air Assist

The Air Assist system directs compressed air precisely into the cutting area, helping remove smoke and debris while improving both cutting quality and processing speed. Unlike conventional systems, the MONOR 1490 features electronically controlled Air Assist that automatically switches on or off depending on the active job. For example, the system activates during cutting operations and remains disabled during engraving to preserve fine details and engraving quality. This also helps extend lens lifetime and reduces the need for frequent optical cleaning.

Built-In Ammeter for Laser Power Monitoring

The MONOR 1490 is equipped with an integrated ammeter that displays the current flowing through the laser tube in real time.
This allows you to monitor the actual laser output and better track the condition and wear of the laser tube over time.
With the built-in ammeter, you can easily optimize power settings for different materials, prevent laser overloading and help extend the overall lifetime of the laser tube.
It is a subtle but highly important feature that clearly separates professional laser systems from lower-end hobby machines.

High-Quality Optics — Precision Lenses and Mirrors with Minimal Power Loss

The MONOR 1490 uses precision optical components made from highly durable materials to ensure maximum laser beam transmission with minimal power loss. High-reflectivity mirrors together with premium anti-reflective coated lenses focus the laser energy into a highly precise point, resulting in cleaner cuts, sharper edges and consistent performance across the entire working area.
The optical components are also designed to withstand high temperatures and contamination, ensuring stable long-term performance with minimal need for adjustment or maintenance.

Real-World Engraving Results

What is MONORLASER?

MONORLASER is a European brand of professional laser systems designed for precision cutting and engraving. We combine technical reliability, high build quality and real manufacturing experience to create machines built for everyday professional use.

Our laser systems are developed for users who expect honest performance, precision and long-term reliability. MONORLASER — laser systems developed with passion for laser technology and for the people who use them every day.

Specifications

Working Area:	1400×900 mm	Cooling System:	Industrial CW5200 Water Chiller
Laser Power:	130W	Power Supply:	230V +/- 10% 50Hz
Laser Type:	CO₂	Power Consumption:	≤ 1700 W (including air assist and cooling)
Red Dot Pointer:	Yes	Laser Tube Lifetime:	5000–6000 hours (EFR tube)
Autofocus:	Yes	Operating Temperature:	5-35 ℃
Engraving Speed:	Up to 1000 mm/s	Supported Graphic Formats:	AI /PLT / DXF / BMP / JPG / GIF / PNG / TIF
Cutting Depth:	0–35 mm (depending on material)	Included Software:	RDWorks
Cutting Speed:	200 mm/s	Compatible Software:	LightBurn / CorelDraw / Illustrator / AutoCAD
Minimum Character Size:	1×1 mm	Connectivity:	USB 2.0, LAN, USB flash disk
Positioning Accuracy:	0.01 mm	Operating System:	Windows 7 and newer
Maximum Resolution:	2000 dpi	Machine Dimensions:	1980x1350x980 mm
Controller:	Ruida	Machine Weight:	350 kg

Materials — Cutting & Engraving

Material	Cutting	Engraving
Wood / MDF	✅	✅
Acrylic / Plexiglass	✅	✅
Cardboard / Paper	✅	✅
Leather / Textile	✅	✅
Rubber	✅	✅
Glass	❌	✅
Metal	❌	❌
Painted / Anodized Metals	❌	✅(marking only)